We are a well known manufacturer, exporter and supplier in this domain, engrossed in offering Liquid Oxygen Pump. The offered pump is manufactured under the strict vigilance of our adept professionals using the finest quality components in order to attain industrial quality standards. This pump is extensively used in conversion of oxygen gas to liquefied oxygen in cylinders upto a pressure range of 165/200 kgs./cm2. Apart from this, the provided Liquid Oxygen Pump can be purchased by our clients at reasonable rates from us.
- Sturdy design
- Optimum performance
- Compact built
- Corrosion resistant body
Liquid Oxygen Pump:
The oxygen pump is a single stage, single acting piston pump. It is used for filling Oxygen into cylinders upto a pressure of 165/200 kgs./cm2.
The pump is designed for assembly in the Air Separation unit that works by pumping liquid oxygen and gasifying the same in Heat Exchangers for final filling as gas in cylinders. Control of liquid feed is unnecessary because the pump is designed in accordance with the plant size and the liquid produced is constantly pumped off.
The drive unit is similar to any reciprocating machine with the crankshaft, flywheel, connecting rod, cross head etc.
The oxygen pump consists of a stainless steel inside liner with liquid inlet and evaporated gas outlet port. There are no valves on these ports, which are closed by the piston itself on the pressure stroke. The third outlet is the main discharge outlet with the two Non-Teturn Ball Valves. The two ensure that these valves are fully closed, a positive pressure of about 60kgs cm2 must be maintained on it. When a fresh batch of cylinders is taken for filling, open the manifold valve slowly or use a spare batch of cylinders to ensure a positive pressure on these valves. Most malfunctions of the pump are due to these valves not closing properly.
When the pump is operated Liquid Oxygen from the main condenser enters the outlet jacket of the pump. Some of this liquid evaporates due to heat produced in pumping and the vapour is passed out through the upper port back into the upper column as gas. The main stream of liquid oxygen is taken into the pump cylinder and compressed out by the piston in the pressure stroke. This high pressure liquid oxygen passes through two non-teturn valves into the Heat Exchangers and then to the Cylinder Filling Rack.
|Type of Pump ||KE 80 ||KE 100 ||KE 200 |
|Number of cylinders ||1 ||1 ||1 |
|Cylinder diameter ||2 mm ||24 mm ||30 mm |
|Piston Stroke ||100 mm ||100 mm ||100 mm |
|Speed ||125/150 RPM ||125/150 RPM ||125/150 RPM |
|Suction Pressure ||0.5 kg/cm2 ||0.5 kg/cm2||0.5 kg/cm2|
|Discharge Pressure (Final Mix) ||165 kg/cm2||165 kg/cm2||165 kg/cm2|
|Operating Temperature ||-183oC ||-183oC||-183oC|
|Normal delivery ||60 to 100 ||90 to 120 ||200 to 225 |
|Driving capacity required ||3 HP ||5 HP ||7.5 HP |
- Cash Against Delivery (CAD), Cash on Delivery (COD), Cash Advance (CA), Cash in Advance (CID), Cheque, Days after Acceptance (DA), Delivery Point (DP), Letter of Credit (L/C), Letter of Credit at Sight (Sight L/C), Telegraphic Transfer (T/T), Western Union, Paypal
- 5 Week
- Asia, Australia, Central America, North America, South America, Eastern Europe, Western Europe, Middle East, Africa
- All India
A-3, Trishul building, Mahakali Caves Road, Andheri (E),, Mumbai, Maharashtra, 400093, India